star_border

Façade renovation - peeling paint

Use the below recommended system to repair an existing painted façade. To ensure a like new finish be sure to remove the existing peeling paint first with a spatula before applying the new façade paint. Smooth the surface irregularities using a renovation render.

4 steps to a new facade

Physically remove the peeling paint and clean the façade. The resulting uneven surface will then need to be rendered and a new quality façade plaster applied.

Step 1

Odlupujúci sa náter na fasáde

Physically remove the peeling paint and clean the façade.

Step 2

Penetrácia na fasádu

For better adhesion and bonding of the render, apply Baumit MultiPrimer bonding primer.

Step 3

Prestierkovanie fasády_MultiWhite

Render the façade using Baumit MultiContact and insert the fibre glass reinforcing mesh.

Step 4

Nová fasádna farba

Once the new render has matured, apply a new façade paint. Choose from Baumit StarColor, NanoporColor or SilikonColor.

Step by step working instructions

1. What do you need?

Obnova fasády - odlupujúci sa náter

Prepare the Baumit MultiContact renovation plaster, fibre glass mesh, Baumit MultiPrimer bonding primer, spatula, anti-corrosive smoother, masonry spoon, hard bristle brush and suitable mixing bucket.

2. Façade cleaning

Odstránenie uvoľnených častí

The surface of the façade must be firm and cohesive, free of algae and cracks. Physically remove the peeling paint using a spatula. Brush or pressure wash the dusty and dirty façade. If the façade still has other deficiencies, it is necessary to remove them first.

3. Bonding primer

Základn náter, hĺbkový základ

Depending on the absorbency of the render, dilute the Baumit MultiPrimer bonding primer with water 1:1 to 1:5 and mix well. Apply the primer onto the render using a brush, a roller, or spray. When applying multiple layers, always apply to a dry layer. Curing time before applying the render is at least 12 hours.

4. Façade rendering

Penetrácia na silno nasiakavý podklad

Apply the Baumit MultiContact to the dry render using an anti-corrosion toothed smoother and insert the fiberglass mesh. After slight drying of the first layer, apply the second thin layer, and after sufficient drying smooth the surface with a polystyrene, felt or foam smoother. Render width 3 - 5 mm.

5. New facade coat

Nová fasádna farba

Apply two layers of high quality façade paint to the clean façade. The first coat is applied diluted with 10 - 15% water. After a break of a min. of 12 hours we apply 1 to 2 coats of the façade paint as required. Allow a min. of 4 hours between each coat.

6. Facade paint spraying

Striekanie fasádnej farby

Baumit façade paint may also be applied using airless spraying. It allows fast and even application of the façade paint in a short time even on large uniform surfaces.

Baumit products